TRUSTY STEP #1001 ANTI-SLIP FLOOR TREATMENT

FEATURES:

Microscopically etches an invisible tread on the treated surface. One treatment makes the floor slip-resistant for a minimum of three years. Can be used indoors or outdoors

FOR USE ON:

Ceramic, porcelain & quarry tile, marble, granite, terrazzo and cement.

TYPICAL APPLICATIONS:

Restaurants, hotels, supermarkets, hospitals, nursing homes, shopping centers, health clubs, pools, etc.

THREE YEAR GUARANTEE

TRUSTY-STEP ANTI-SLIP FLOOR TREATMENT is guaranteed to  raise the static coefficient of friction on hard mineral surfaces (ceramic, quarry & porcelain tile, marble, granite, terrazzo and cement) to 0.6 for a minimum period of 3 years.

Routine cleaning and maintenance to remove grease, oil or other substances is required.

This Guarantee shall only provide for re-treatment of  any surface that is found to lose its non-slip effectiveness. This Guarantee shall be void if the static coefficient of friction of a treated surface falls below 0.6 because of the presence of a foreign substance. It does not cover compensation for injuries or losses due to slip/fall accidents or other direct, indirect or consequential damages resulting from the failure of any treated surface to retain a static coefficient of friction of 0.6.

PACKAGING & PRICING:

• 4 oz Sample Kit - Will Treat 10 Sq. Ft.    $30.00 plus shipping & taxes
  

• 32 oz Container - Will Treat 90 Sq. Ft.    $120.00       plus shipping & taxes
  

• 128oz Gallon     - Will Treat 350 Sq. Ft.   $395.00       plus shipping & taxes
  

• Box - 4 Gallons - Will Treat 1400 Sq. Ft. $1395.00     plus shipping & taxes
  

• Floor Applicator & Pad                           $25.00         plus shipping & taxes
  

For additional information please contact sales@trustystepsystems.com or call 877-291-1855  

"For floors that simply won't slip"

GOOD TO KNOW:

Our #1001 Anti Slip Floor Treatment is the best solution for slippery when wet problems on mineral tiles!

You will find that after treatment your tile floor is actually more anti-slip when wet than when dry.

Liquid solution is applied with a "doodle bug" --->  floor applicator & pad.

It is an environmentally friendly solution with a very mild acid base.

The entire process usually takes around 45 minutes.

The floor will look the same after treatment - this is an invisible treatment.

This treatment will not work on sealed tiles or sealed cement! Test areas are always recommended!

See "Videos" for additional information on treatment process.

Download Full Instructions

APPLICATION INSTRUCTIONS:

• Sweep floor clean, wash thoroughly and let dry.
  

• Pour about 8 ounces of #1001 directly onto floor.
  

• Immediately spread #1001 evenly over floor with floor applicator
  

• Continue spreading & moving #1001 for ENTIRE treatment time. Failure to spread & move #1001 will allow it to congeal and cause spots to appear when the job is completed. You may walk on the floor during application.
  

• After treatment time, rinse one square foot with water. Push your shoe across rinsed surface to test slip    resistance. If satisfactory, rinse entire floor with clean water using a hose or a bucket. Continue rinsing until all traces of #1001 are gone. If not satisfactory, continue applying #1001 to floor for an additional time until desired results are achieved. Then rinse with water as above.
  

• Squeegee floor dry. Use wet vacuum or mop if there is no drain.
  

• Floor is now ready to be walked on and will remain slip-resistant for 3 years - GUARANTEED
  

TRY IT FOR YOURSELF

For $30.00 you can order a trial kit and convince your self on how well it works!

(The $30 is fully refunded with your first order)

877-291-1855

Website Designed at Homestead™ Build a Website for Your Business